IBM s390 QDIO Ethernet Driver¶
OSA and HiperSockets Bridge Port Support¶
To generate the events the device must be assigned a role of either a primary or a secondary Bridge Port. For more information, see “z/VM Connectivity, SC24-6174”.
When run on an OSA or HiperSockets Bridge Capable Port hardware, and the state of some configured Bridge Port device on the channel changes, a udev event with ACTION=CHANGE is emitted on behalf of the corresponding ccwgroup device. The event has the following attributes:
indicates that the Bridge Port device changed its state.
the role assigned to the port.
the newly assumed state of the port.
When run on HiperSockets Bridge Capable Port hardware with host address notifications enabled, a udev event with ACTION=CHANGE is emitted. It is emitted on behalf of the corresponding ccwgroup device when a host or a VLAN is registered or unregistered on the network served by the device. The event has the following attributes:
host address notifications are started afresh, a new host or VLAN is registered or deregistered on the Bridge Port HiperSockets channel, or address notifications are aborted.
VLAN ID on which the event occurred. Not included if no VLAN is involved in the event.
MAC address of the host that is being registered or deregistered from the HiperSockets channel. Not reported if the event reports the creation or destruction of a VLAN.
device bus ID (CSSID, SSID and device number).
device channel ID.
Note that the NTOK_* attributes refer to devices other than the one connected to the system on which the OS is running.